Need help?Do you have a question about the Siemens WU14UT60HK and is the answer not in the manual?
Read manual carefully, keep for future reference.
Use appliance for machine-washable fabrics and hand-washable wool.
Appliance for supervised use by children 8+ and people with reduced abilities.
WARNING – Risk of electric shock! Incorrect installation is dangerous.
WARNING – Risk of electric shock! Damaged appliance or cord is dangerous.
WARNING – Risk of electric shock! Improper repairs are dangerous.
Packaging materials are environmentally compatible and recyclable.
Follow instructions to use less electricity and water.
Appliance automatically enters energy-saving mode when not in use.
Remove packaging, check for damage, and remove drum accessories.
Check all parts for transit damage and completeness after unpacking.
WARNING – Risk of electric shock! Do not operate without a cover cap.
Appliance secured for transport using rear transit bolts.
Connect water inlet hose to tap and check for leaks.
Insert mains plug into socket and check proper insertion.
Align appliance correctly to reduce noise and vibration.
Overview of appliance parts with numbered labels.
Note manufacturer's instructions on detergent use and dosage.
Use control panel to configure functions and get status information.
Run first wash cycle without laundry to remove residual water.
Display shows current settings, options, or relevant information.
Explanation of the function of each control panel button.
Details of wash programmes, settings, and load capacities.
Information on original accessories, their use, and order numbers.
ATTENTION! Objects in laundry may damage appliance.
Notes on using liquid detergents, mixing products, and avoiding substances.
Requirement: Appliance correctly installed and connected.
Turn programme selector and set the required programme.
Adjust programme settings as required.
Note: To prevent creasing, note maximum load for programmes.
Use measuring aid in detergent drawer if ordered.
Use measuring aid in detergent drawer for liquid detergent.
Notes on using liquid detergent, washing powder, or gel detergents.
Press Start/Reload to start the programme.
Change set programme end time before starting.
Note: No additional detergent is required for soaking.
Remove or add laundry after the programme starts.
Press Start/Reload and open door to cancel.
Resume programme from Rinse Hold status.
Open door and remove laundry from the drum.
Turn programme selector to Off and turn off tap.
Press and hold 3 sec. buttons for approx. 3 seconds to activate.
Press and hold 3 sec. buttons for approx. 3 seconds to deactivate.
Configure basic settings: end signal, button signal, drum cleaning reminder.
Instructions to change basic settings via selector and buttons.
Displays the number of finished programmes.
CAUTION Risk of injury! Run drum cleaning programme or wash at 60°C+.
Pull out detergent drawer and clean with water and brush.
Clean drain pump regularly, at least yearly, or for faults.
Steps to safely remove the washing machine.
Secure appliance with transit bolts for transport to prevent damage.
Information for re-installing and starting the appliance.
Dispose of appliance in an environmentally friendly manner.
Locate product and production numbers for Customer Service contact.
Approximate consumption values for different programmes.
Mains voltage, dimensions, weight, and water pressure information.
To Next Page
General