EasyManua.ls Logo

Siera IP Camera VSP 3001 - Troubleshooting Common Issues

Default Icon
25 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
21
Display as below:
C:\>arp -d
C:\>arp -s 192.168.1.61 00-0c-e8-00-00-01
C:\>ping -t 192.168.1.61
Pinging 192.168.1.61 with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
Reply from 192.168.1.61: bytes=32 time=5ms TTL=255
Reply from 192.168.1.61: bytes=32 time=4ms TTL=255
Reply from 192.168.1.61: bytes=32 time=4ms TTL=255
Reply from 192.168.1.61: bytes=32 time=4ms TTL=255
Ping statistics for 192.168.1.61:
Packets: Sent = 7, Received = 4, Lost = 3 (42% loss),Approximate round
trip times in milli-seconds:
Minimum = 4ms, Maximum = 5ms, Average = 2ms
Control-C
^C
C:\>arp -d
C:\>exit
2 clear ARP: enter<arp d>.
3 Set up ARP: enter<arp s 192.168.1.61 00-0c-e8-00-00-01>.
4 PING: enter<ping t 192.168.1.61>.
5 Turn off the network camera.
6 Turn on the network camera again.
7 Enter Ctrl-c after Pinging, and enter <arp-d> to clear ARP
statistics.
8 Enter <exit> to quit the DOS.