Ionics Instruments 2004 Page 6-27 DLM 30007-08 Rev. A
4. Press ENTER to input the first letter of the current password. If a
mistake has been made, press CLEAR to delete first letter.
5. Use the arrows ( or ) to select the remaining letters, pressing
ENTER to input each letter.
6. After all of the letters of the current password have been entered,
press ENTER again to enter the password. The top line in the display
should change to indicate that the correct password has been
entered.
ENTER
CLEAR
THAT IS CORRECT
*****
FIGURE 6-31: Correct Password Confirmation Screen
7. The display will then change to the ENTER NEW PASSWORD
screen:
ENTER
CLEAR
ENTER NEW PASSWORD
ENT= SAVE CHAR/PSWD
CLR= RESTART/EXIT
RROWS = CHANGE CHAR
FIGURE 6-32: ENTER NEW PASSWORD Screen
To Next Page
Loading...