Sievers TOC 820 User Manual

Ionics Instruments 2004 Page F - 1 DLM 30007-08 Rev. A
APPENDIX F – CONSUMABLES AND ACCESSORIES
To place an order, please contact Ionics Instruments Order Entry at
800-255-6964 or 303-444-2009 –
 East coast and Canada: ext. 129 or 226
 West coast and Puerto Rico: ext. 103 or 184
Refer to our Web site (www.IonicsInstruments.com) for the most current list.
Part Number Description
Consumables
ARE 00020 UV Lamp
ATU 00646 Pump tubing
HTF 94402 60 micron filter element
TOC MAINT Consumables kit – 12 months (reagents, UV lamp, pump tubing)
APF 80010 Acid reagent
APF 80025 Persulfate reagent
Standards – Sets
STD 31001 Calibration Standard Set, Grab Mode – includes one Calibration Blank (STD
30003), two TOC Calibration Standards (STD 30001) and two IC Calibration
Standards (STD 30002).
STD 31002 Calibration Standard Set, Autosampler – includes four Calibration Blanks
(STD 30003), four TOC Calibration Standards (STD 30001) and four IC
Calibration Standards (STD 30002).
STD 31004 System Suitability Standard Set, Grab Mode – includes one Rw – Reagent
Water Control (STD 30006), one Rs – Standard Solution (STD 30004) and
one Rss - System Suitability Solution (STD 30008).
STD 31007 System Suitability Standard Set, Autosampler – includes two Rw – Reagent
Water Controls (STD 30006), two Rs – Standard Solutions (STD 30004) and
two Rss - System Suitability Solutions (STD 30008).
STD 31008 Low Concentration Precision Standard Set, Autosampler – includes two Rw-
Reagent Water Control (STD 30006) and five Rs -Standard Solution (STD
30004).
STD 31009 High Concentration Precision Standard Set, Autosampler – includes two
Calibration Blanks (STD 30003) and five TOC Calibration Standards (STD
30001).
STD 31012 Linearity Standard Set – includes one each 250 µg C/L, 500 µg C/L, 750 µg
C/L as USP Sucrose and a Reagent Water Blank.
STD 31013 Low Level Precision Standard Set, Grab Mode – includes one Rw- Reagent
Water Control (STD 30006) and one Rs -Standard Solution (STD 30004).
STD 38001 Validation Standards Set for Grab Mode – includes one Calibration Set (STD
31001), one System Suitability Set (STD 31004), one Linearity Set (STD
31012), one Rw- Reagent Water Control (STD 30006) and four Rs -Standard
Solutions (STD 30004).
STD 38101 Validation Standards Set, Autosampler (low concentration) – includes one

Sievers TOC 820 Specifications

General

Brand	Sievers
Model	TOC 820
Category	Measuring Instruments
Language	English