Sig Sauer BASEMAP KILO KILO6KHD User Manual

27
4. Unit of Measure Selection (Y or M)
Your current selection will be ashing (Yards is default). You can toggle between Y or M by
pressing and releasing the RANGE button. Conrm your selection by pressing and releasing the
MODE button which will save your setting and index to the next setting for conguration. If you
do not press and release the MODE button the rangender will save your selection and turn o󰀨.
5. Ballistic Group Selection
Your current selection will be ashing (APP is default). You can toggle between a custom
ballistic prole (APP) congured using the BDX App or one of the 8 ballistic groups by pressing
and releasing the RANGE button. Conrm your selection by pressing and releasing the MODE
button which will save your setting and index to the next setting for conguration. If you do not
press and release the MODE button the rangender will save your selection and turn o󰀨. The
programming sequence for selecting a custom ballistic prole or ballistic group is grP1 > grP2
> grP3 > grP4 > grP5 > grP6 > grP7 > grP8 > APP > grP1. If you have previously congured a
custom ballistic prole then APP should be ashing. Your KILO
®
must be in BDX-U mode when
using a custom bullet prole or any of the 8 embedded groups in order to display your holdover
solution.

Sig Sauer BASEMAP KILO KILO6KHD Specifications

General

Brand	Sig Sauer
Model	BASEMAP KILO KILO6KHD
Category	Binoculars
Language	English