Field
#
Field Purpose
Permitted Field
Values
Factory Setting
82
C4 Manual Rev 7.5.2
10
PID controller, Integral term
Tens of seconds required for I term effect
equal to P
term effect
Adjustment not
normally
required
5 - 7
Default = 5
11
PID controller, Differential term
Seconds required for D term effect to equal
P term effect
Adjustment not
normally
required
5 - 7
Default = 5
12
PID controller, integral wind-up
limiter term
Adjustment not
required
7
13
Refrigeration compressor front
panel control
1=yes 0=no
0 - 1 0
14
Autostart in Local Mode
1=yes 0=no
0 - 1 0
15
Blower shut-off mode
0=disable 1=enable
0 - 1 0
16
Temperature Scale
0=Celsius 1=Fahrenheit
0 - 1 0
17
Probe 1 Correction
Uncorrected first value (U1)
See Section 8.7 0
18
Probe 1 Correction
Corrected first value (C1)
See Section 8.7 0
19
Probe 1 Correction
Uncorrected second value (U2)
See Section 8.7 100
20
Probe 1 Correction
Corrected second value (C2)
See Section 8.7 100
21
Probe 2 Correction
Uncorrected first value (U1)
See Section 8.7 0
22
Probe 2 Correction
Corrected first value (C1)
See Section 8.7 0
23
Probe 2 Correction
Uncorrected second value (U2)
See Section 8.7 100
24
Probe 2 Correction
Corrected second value (C2)
See Section 8.7 100
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...