EasyManua.ls Logo

Sigma 6K15 User Manual

Sigma 6K15
59 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Operating Manual
Refrigerated Centrifuge
1-14K
from serial no. 135550
Please retain for later use!
Version 05/2010, Rev. 1.8 of 01/09/2011- sb
Translation of the original operating manual

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Sigma 6K15 and is the answer not in the manual?

Sigma 6K15 Specifications

General IconGeneral
BrandSigma
Model6K15
CategoryLaboratory Equipment
LanguageEnglish

Summary

General Information

Intended Use

Defines the specific purpose and limitations of the centrifuge's application.

Design of the Centrifuge

Safety

Responsibility of the Operator

Defines the operator's duties and responsibilities for safe operation.

Electrical Safety

Details precautions to prevent electrical shock hazards during operation.

Mechanical Safety

Outlines critical safety measures to prevent mechanical injuries.

Fire Prevention

Lists safety instructions to prevent fire hazards.

Chemical and Biological Safety

Advises on safe handling of hazardous substances during centrifugation.

Safety Instructions for Centrifugation

Provides essential safety guidelines to follow before starting a centrifugation run.

Measures in the Event of Hazards and Accidents

Provides immediate actions to take in case of emergencies or accidents.

Set-up and Connection

Installation Site

Details the requirements for selecting an appropriate location for centrifuge installation.

Power Supply

Covers electrical connection and fuse requirements for the centrifuge.

Connection

Explains how to properly connect the centrifuge to the power supply.

Using the Centrifuge

Installation of Rotors and Accessories

Guides the user on installing rotors and various accessories.

Installation of the Rotor

Step-by-step guide for installing the centrifuge rotor correctly.

Operating Panel

Describes the functions and layout of the centrifuge's control panel.

Centrifuge Display

Explains the information shown on the centrifuge's display screen.

Starting a Centrifugation Run

Outlines the steps to initiate a centrifugation cycle.

Speed / Relative Centrifugal Force (RCF)

Explains how to set and change speed and RCF values.

Runtime

Explains how to set and manage the centrifugation time.

Temperature

Details how to set and monitor the rotor chamber temperature.

Rotor Selection

Guides the user on selecting the correct rotor configuration for operation.

Malfunctions and Error Correction

General Malfunctions

Covers common error messages and their initial troubleshooting steps.

Emergency Lid Release

Explains how to manually open the lid in case of power failure.

Error Codes

Lists specific error codes and their corresponding measures and notes.

Service Contact

Provides contact information for technical support and service inquiries.

Maintenance and Service

Maintenance

Outlines routine maintenance procedures for the centrifuge and its components.

Service

General information regarding service procedures and recommendations.

Technical Data

Appendix

Relative Centrifugal Force (RCF)

Explains the formula and calculation for Relative Centrifugal Force.

Related product manuals