Need help?Do you have a question about the Sigma 3-16P and is the answer not in the manual?
General| Brand | Sigma |
|---|---|
| Model | 3-16P |
| Category | Laboratory Equipment |
| Language | English |
Defines the proper use of centrifuges and warns against improper applications.
Provides essential safety guidelines for operating the centrifuge during centrifugation.
Lists forbidden operations and general hazard warnings to prevent accidents.
Highlights specific risks such as opening the lid during operation or improper loading.
Details active safety features like lid lock, standstill monitoring, and imbalance detection.
Explains the function of the lid lock and closing mechanism for safety.
Ensures the rotor has stopped before the lid opens.
Describes how the system detects and reacts to rotor imbalance.
Guides the user through the first-time setup and operation of the centrifuge.
Instructs on how to power on the centrifuge using the main switch.
Details the procedure for opening and closing the centrifuge lid safely.
Provides step-by-step instructions for correctly installing rotors.
Guides on how to properly install various accessories like carriers and tubes.
Provides guidance on loading tubes correctly, including filling and density considerations.
Explains how to initiate a centrifugation run after setup.
Explains how to set the centrifugation time, including increments and continuous run.
Guides on how to set and preselect the desired speed for centrifugation.
Explains how to set and preselect RCF values for centrifugation.
Covers manual selection and automatic identification of installed rotors.
Lists checks for power, cord, fuses, and lid when the display is blank.
Offers solutions for when the centrifuge fails to start or lid key flashes.
Provides steps to resolve issues with opening the lid when the lock fails.
Details the procedure for manually opening the lid during a power failure.
Lists specific error codes, their causes, and recommended measures.
Provides contact information and procedures for service inquiries and support.
Specific instructions for cleaning the centrifuge, including safety precautions for contamination.
Guides on using disinfectants and considerations for autoclaving.
Recommends annual checks and describes service procedures.
Explains the formula for calculating RCF and its interrelation with speed and radius.
Provides a table showing the resistance of various materials to different chemicals.
To Next Page
