Version 06/2007, Rev. 1.15 of 16/09/2011 - sb page 34 of 75
Translation of the original operating manual
5.2.7.2 Softstart and Softstop Function
The softstart function is used to extend the acceleration time, whereas the
softstop function is used to extend the deceleration time. The current combination
is shown on the display. The stop key can be used to cyclically select various
combinations:
• Press the key once to active the softstart function.
• Press the key twice to activate the softstart function and the softstop function.
• Press the key three times to active the softstop function alone.
• Press the key four times to activate the softstart function and the brakeless
deceleration. The “soft stop” display flashes when the brakeless deceleration
is active.
• Press the key five times to activate the “brakeless deceleration” function
alone (the “soft stop” display flashes).
• Press the key once more to return to the standard operating mode.
5.3 Display / Program Options
The centrifuge display (fig. 5.10) has the following display fields:
1 Time field
2 "Lock" symbol for lockdown
3 Speed field
4 RCF field
5 Field for rotor selection, imbalance indication, run mode, and program
selection
To Next Page
Loading...
Need help?
General
