Need help?Do you have a question about the Sigma SPRIZZA SPZ 40 and is the answer not in the manual?
General| Brand | Sigma |
|---|---|
| Model | SPRIZZA SPZ 40 |
| Category | Laboratory Equipment |
| Language | English |
Introduction to the manual's purpose and intended audience for safe operation.
Conditions for warranty activation and duration for the machine.
Procedure for reporting and resolving defects under warranty.
Identification of parts subject to wear and not covered by warranty.
Guidelines for personnel, work environment, and operational safety practices.
Description and importance of machine safety devices.
Requirements for operator training and information on safe machine use.
Information required for ordering spare parts from the manufacturer.
Identification of specific hazards like crushing and electrocution.
Definitions of symbols and roles used in the manual.
Description of materials used and surface treatments.
Units of measurement used throughout the manual.
Key technical specifications of the machine (model, mass, power).
Physical dimensions of the machine.
Dimensions and specifications of the machine's packaging.
Identification and function of the control panel elements.
Details of the machine's mechanical drive and motor specifications.
Instructions for storing the machine, both packaged and unpackaged.
Conditions for use, environmental factors, and lighting requirements.
Information on machine vibrations and sound emissions.
Procedures and safety precautions for transporting the machine on a pallet.
Procedures and safety precautions for lifting and moving the machine off a pallet.
Guidance on positioning and installing the machine for stability.
Instructions for safe and correct electrical connection of the machine.
Procedure for initial adjustment of dough thickness settings on the machine.
Step-by-step guide for operating the dough processing machine.
Notes and troubleshooting tips for common dough processing issues.
Information on dough types, weights, and diameters suitable for processing.
Preliminary information on dough characteristics and processing requirements.
Safety precautions for maintenance and verification of the master switch.
Purpose and function of the stop circuit and micro-switch for machine stoppage.
Periodic inspection of automation, earthing, safety functions, and cables.
Checks on external components, belt wear, and bolt tightening.
Procedure for replacing the felt and cloth, including safety precautions.
Steps for properly tensioning the machine's belts.
Detailed procedure for replacing the counterweight cable, with safety measures.
Guide on how to properly tension drive belts and chains.
Procedures for operations not specifically mentioned, like motor replacement or fall damage.
Daily checks and procedures for cleaning the machine body and components.
Table of operating anomalies, possible causes, repairs, and responsible personnel.
List of recommended spare parts with quantities and drawing numbers.
List of recommended spare electrical components.
List of optional accessories available for the machine.
User obligations regarding waste disposal and WEEE regulations.
To Next Page
