Instructions, use and maintenance manual Pag. 28/48
SRIZZA 40
14.4. System checks
Periodically inspect the operation of machine automation and its earthing. Inspect the methods of operation, the
safety functions, the contacts on the terminal board and the integrity of the cables, of the luminous indicators and of
the earthing
VERIFICATION:
INTERVAL METHOD
m F, M
14.5. Routine maintenance
Check the external components of the machine: lifting lever, planarity adjustment lever.
Check the belt wear after the first few months of processing.
Check bolt tightening of the entire machine.
INTERVAL METHOD
m F,M
To Next Page
Loading...
