EasyManua.ls Logo

Sigma 3-16P - Technical Data

Sigma 3-16P
75 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Version 06/2007, Rev. 1.15 of 16/09/2011 - sb page 12 of 75
Translation of the original operating manual
1.3 Technical Data
Manufacturer: S I G M A Laborzentrifugen GmbH
An der Unteren Söse 50
37520 Osterode
Type: 3-16P
Electr. connection:
Protection class:
IP code:
See name plate
I
20
Connected load (kVA):
Power consumption (kW):
Max. current consumption (A):
0.82
0.5
3.2 (at 220-240 V / 50-60 Hz)
6.8 (at 120 V / 60 Hz)
Performance data:
Max. speed (rpm):
Max. capacity (ml):
Max. gravitational field (x g):
Max. kin. energy (Nm):
14 500
1 000
21 475
9 530
Other parameters:
Time range:
Storage locations:
10 sec – 11 h 59 min;
short run, continuous run
50
Physical data:
Depth (mm):
Width (mm):
Height (mm):
Weight (kg):
EMC as per EN 61326:
Noise level (dBA):
600
460
355
48
Klasse B
< 70
1.3.1 Ambient Temperature
The figures are valid for an ambient temperature of +23°C ± 2 °C and a
nominal voltage ± 10 %
.
Allowable ambient temperature +5°C to +40°C.
Max. relative humidity of air 80% up to 31°C with a linear decrease to
50% relative humidity of air at 40°C.
Lowest storage and transport temperature –20°C (see chapter 3
"Transport and Storage", page 21).
At a nominal voltage of 100V or 200V, a tolerance of +10% / -5% applies.
Fig. 1.1: Technical Data

Table of Contents

Related product manuals