Version 06/2007, Rev. 1.15 of 16/09/2011 - sb page 42 of 75
Translation of the original operating manual
5.3.8 Activating/Deactivating the Sound Signal
If this function is active, a sound signal can be heard at the end of the operation
as well as in the event of an error message or imbalance.
• Press the lid key five times and on the fifth time hold it down for approx. two
seconds.
• Proceed in the same way in order to deactivate the function.
After every change, the current status of the setting is displayed in the form of a
message running in the display ("Buzzer on" or "off").
To Next Page
Loading...
