ANY CHECK OR MAINTENANCE OPERATION SHOULD BE CARRIED OUT ONLY WHEN
THE MIXER IS UNPLUGGED AND POWER IS DISCONNECTED.
The machine does not need particular maintenance operations. Check worn-out level of the belt
after the first three months.
Periodically grease every 4 ÷ 6 months the points shown in the following sketch (use
MOLYKOTE 165 LT ).
ATTENTION: The machine is not waterproof, therefore whatever cleaning process must not
involve a jet of water.
If the power supply cable becomes damaged it must be substituted with a H07RN/F cable with a
cross-sectional measurement of 3x1,5 mm
2
.
WIRING DIAGRAM
POSSIBLE FAULTS AND REPAIRS
To Next Page
Loading...
