7
GB
2.3 ATTACHING THE CHEST BELT /HANDLEBAR HOLDER
Before the first training session enter your
personal settings. To do this, press the top or
bottom button for 3 seconds to go from sleep
mode to active mode.
3. SETTINGS BEFORE THE FIRST TRAINING
k THE SETTINGS MENU
Assemble the handlebar holder. Then fix the
handlebar holder with the O ring and close the
wristband.
Now press the bottom button for about 3 sec.
in active mode. The screen first displays “SET
OPEN” and then “USER”. You are now in the
settings menu.
To Next Page
Loading...
