216
www.sigmasport.com
5.1 OPENING THE SETTING MODE
Prerequisite: your running computer must first be
in training mode (see section 4.3 “Overview of modes
and functions”).
Press and hold the SET button for 3 seconds. When
the display flashes twice, the setting mode is open.
5 SETTING MODE
5.2 DISPLAY SETUP
5.3 BUTTON ASSIGNMENT IN SETTING
1
st
line SET indicates that the setting mode
is open.
3
rd
line/ Submenu or the setting to be
4
th
line changed.
START/STOP
Press: In calibration
mode, start and stop
the measurement
SET
Press: Select function
Save value
Press and hold: Quit setting
mode (in the calibration
mode, quit calibration)
LIGHT
Press:
Light on
PULSE
Press: Scroll backward
Press and hold:
Scroll continuously
SPEED
Press: Scroll forward
Press and hold: Scroll
continuously
To Next Page
Loading...
