219
US/GB
Press SPEED (+) button repeatedly until “Clock”
appears on the display.
Press SET button. “24H” appears and flashes.
With the SPEED (+) or PULSE (-) button choose
between a 12-hour or 24-hour display.
Press SET button. The time is displayed.
The hours entry flashes.
Press SPEED (+) or PULSE (-) to change the hour.
Press SET button, the minute entry flashes, and then
it can be set with the PULSE (-) or SPEED (+) button.
Press SET button. The newly set time is saved.
5.5.6 SETTING TIME
Prerequisite: Your running computer is in the setting mode.
5 SETTING MODE
To Next Page
Loading...
