66
www.sigmasport.com
8 PC INTERFACE/SIGMA DATA CENTER
With the aid of the interface between the
SIGMA ROX 9.1 and your PC, you can transfer
the logged data or the trip and total values to
your PC.
To do this, first install the software supplied
then connect the docking station to your PC.
Using the SIGMA SPORT
®
software, you can
perform the following actions:
k Set all functions on the SIGMA ROX 9.1
with the aid of the PC
WINDOWS COMPUTER
Minimum
k
Intel
®
Pentium
®
III Processor
k
512 MB RAM
k
Microsoft
®
Windows
®
XP Home, Professional,
or Tablet PC Edition with Service Pack 2 or
later versions
8 PC INTERFACE/SIGMA DATA CENTER
k Check the battery status of all the parts
to the appliance
k Download the saved data (memory,
total values and logged data) as
a SIGMA SPORT
®
file or as an export
format.
k Show the saved data in table or graphic
form
k Compare 2 rides
k Analyse the distances cycled
Please find further details about the software
on the online software help section.
8.1 SYSTEM REQUIREMENTS
1. Before installation, you should close all
applications that are running.
2. Place the installation CD in your CD drive.
3. Installation starts automatically.
Alternatively, select your CD drive and
start “setup.exe” manually.
4. Follow the installation instructions on the
screen.
5. Adobe “Air Framework” is required to
perform the SIGMA DATA CENTER.
8.2 INSTALLING THE SIGMA DATA CENTER
This is automatically installed at the same
time. Please follow the instructions for
Adobe “Air Installation”.
6. Once the installation has finished, you can
remove the CD.
You can find further information about the
“SIGMA DATA CENTER” functions in the
program’s online help section.
MAC COMPUTER
k Intel Core
™
Duo Processor or faster.
k 512 MB RAM (1 GB recommended)
k MacOs X version 10.4.9 or later
Recommended
k
Intel
®
Pentium
®
IV Processor
k
1 GB RAM
k
Microsoft
®
Windows
®
XP Home, Professional,
or Tablet PC Edition with Service Pack 2 or
later versions
To Next Page
Loading...
Need help?
General
