EasyManuals Logo

Sigma ROX 9.1 User Manual

Sigma ROX 9.1
41 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
45
USA/GB
ROX 9.1
3 EVERYTHING ABOUT THE SIGMA ROX 9.1
This section shows various information depending upon the menu.
3.4.1 UPPER DOT MATRIX BLOCK
3.4.1.1 FAVORITES A AND B
Up to 4 current values can be displayed here:
k The current altitude (permanent)
k The current incline (permanent)
k Your current pulse (only if the chest belt has been put on)
k The current cadence (only if the cadence transmitter is fitted)
By pressing the top right button, the display zooms so that only
1 of the 4 possible functions is largely displayed. Press the top right
button again to scroll to the next function.
3.4.1.2 NAVIGATION LEVEL
When enabled, the navigation level always appears by pressing one of
the two top function buttons once. The possible button functions are
shown in the navigation level. Once you are familiar with the computer
and its functions, you have the option of switching off the navigation level
in the “Settings” menu (settings/unit/buttons info).
3.4.1.3 INFORMATION BAR
The upper DOT matrix block, or the “information bar”, helps you to find
your way around the levels. This applies to the following menu levels:
“Trip data”; “Time”; “Memory”; “Setting”.
The main menu is shown in the top part of the display, while the current
submenu is shown in the bottom part.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sigma ROX 9.1 and is the answer not in the manual?

Sigma ROX 9.1 Specifications

General IconGeneral
BrandSigma
ModelROX 9.1
CategoryBicycle Accessories
LanguageEnglish

Related product manuals