Page 3:X
SIGMA TANDEM SYSTEM OWNER’S MANUAL
11301 - 00.00.0000 Section 2: Equipment • Chapter 1 - Description
Main Lift Web Adjustment Points
Webbing is adjusted through a
pair of three bar adapters.
Bottom Student
Attachment Point
Consists of two RW-8 rings
mounted sideways, threaded
through each diagonal on the
left and right sides.
Reserve Ripcord
Left hand pull. Either a
webbing loop handle (or soft
pillow handle) attached firmly
to the left main lift web in an
outboard position. Handle
color is red.
Top Student
Attachment Point
Two D-rings mounted
inverted under the large
harness ring on both sides of
the main lift web.
Cutaway Handle
Right hand pull. Soft pillow
handle (or loop-style handle)
attached firmly in an
outboard position on right
main lift web. Handle color is
green.
Auxiliary Reserve Ripcord/Integrated Lanyard
(Dual Purpose)
A. Auxiliary Reserve Ripcord: Right hand pull. Ball handle on reserve static
line next to 3-Ring on right hand side of rig. To be used if left hand is
incapacitated in any way, and unable to pull reserve ripcord. Ball must be
pulled straight up to release RSL connectoin and initiate reserve activation.
B. Integrated Lanyard: RSL can be used prior to landing in the event of high
ground winds.
Secondary Right Hand
Drogue Release Handle
Right hand pull. Orange golf
ball.
HARNESS
No Crytal Ball
If the system has a Skyhook
installed there will be no Crystal
Ball.
To Next Page
Loading...