EasyManua.ls Logo

Sigma TANDEM VECTOR - Page 44

Sigma TANDEM VECTOR
175 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SIGMA TANDEM SYSTEM OWNER’S MANUAL
Page 6:X
Section 2: Equipment • Chapter 3 - Packing the Reserve w/ Skyhook 11301 - 00.00.0000
Flaking the Canopy: With the lines passing over
the shoulder start with the end cell nearest your
legs, begin flaking the nose of the canopy. Pull
each cell completely out, and keep it in your
hand. Then, pick up the next, taking care not to
miss any until all the cells are in your hand. When
you have the entire nose flaked, tuck it between
your knees and hold it there. Clear the stabilizers.
Flake the material between each line group out
toward the stabilizers, keeping the line groups
stacked together in the middle of the pack job.
Clear the tail, flaking the material between each
steering line toward the outside of the pack job.
Flake the leading edge of the canopy with an
even number of cells to the left and the right
leaving the center cell fully exposed in the
middle.

Table of Contents