SIGMA TANDEM SYSTEM OWNER’S MANUAL
Page 18:X
Section 2: Equipment • Chapter 3 - Packing the Reserve w/ Skyhook 11301 - 00.00.0000
Dress the pack job to the finished shape desired.
2" to 3" of canopy material protruding from the
mouth of the bag will help fill the reserve
container corners.
Do not rely on the container to shape the pack
job or hide poor bulk distribution!
The bagged canopy should reflect the desired
shape of the rig for best results.
It should be square at the bottom, wedge
shaped in profile, and thin at the top.
When pressing down on the pack job, it should
be firm at the mouth of the bag and get
progressively softer as you get closer to the
bridle attachment point.
Place two velcro protectors on the line stow
pouch.
Stow the remainder of the suspension lines into
the pouch on the underside of the bag using S-
folds that extend from one side of the pouch to
the other. Be sure none of the lines are trapped
between the hook and loop fastener at the
mouth of the pouch. Remove the two velcro
protectors from the bag.
To Next Page
Loading...