Need help?Do you have a question about the SIGMATEK STO 081 and is the answer not in the manual?
Details on output voltage, current, and timing characteristics, including inductive and capacitive loads.
Diagram showing the internal output circuit of the STO 081 safety digital output module.
Specifies voltage supply and current consumption from the safety bus for the module.
Provides product article number, standard, approvals, and mission time.
Defines operating temperature, humidity, altitude, noise, EMC, vibration, and protection type.
Describes the function and status indication of LEDs on the module.
Details connector types, stripping length, conductor cross-sections, and termination methods.
Information on compatible printers and article numbers for creating module labels.
Notes on the product's low-maintenance design and operational considerations.
Instructions for defect handling, repair process, and transport conditions for service.
Identifies intended users and the manual's scope for product operation.
Lists essential related documents, such as the Safety System Handbook, for further information.
Specifies the items included in the product delivery package.
Explains the meaning of danger, warning, and information symbols used in the manual.
States limitations on liability and information accuracy, and responsibilities of manufacturer/operator.
Outlines essential safety instructions and compliance with EU Directives and machine safety standards.
Defines the product's intended applications and safety requirements for safe operation.
Details software used for configuration and availability of training for development environments.
Identifies residual risks that must be included in system integrator's risk assessment.
Advises to observe on-site rules for accident prevention and occupational safety.
States product compliance with European Union directives and functional safety standards.
Details safety parameters like PFHD, MTTFd, DC, and SFF under different operating conditions.
Refers to section 'Compatibility of S-DIAS Safety Modules' in the system handbook for integration.
Provides a schematic diagram illustrating the wiring connections for the module's terminals.
Offers installation guidelines, wiring notes, and precautions for connecting/disconnecting modules during operation.
Instructions to ensure delivery contents are complete and intact before proceeding with installation.
Details requirements for mounting the S-DIAS modules on a DIN rail in a control cabinet, including clearance.
Details on output voltage, current, and timing characteristics, including inductive and capacitive loads.
Diagram showing the internal output circuit of the STO 081 safety digital output module.
Specifies voltage supply and current consumption from the safety bus for the module.
Provides product article number, standard, approvals, and mission time.
Defines operating temperature, humidity, altitude, noise, EMC, vibration, and protection type.
Describes the function and status indication of LEDs on the module.
Details connector types, stripping length, conductor cross-sections, and termination methods.
Information on compatible printers and article numbers for creating module labels.
Notes on the product's low-maintenance design and operational considerations.
Instructions for defect handling, repair process, and transport conditions for service.
Identifies intended users and the manual's scope for product operation.
Lists essential related documents, such as the Safety System Handbook, for further information.
Specifies the items included in the product delivery package.
Explains the meaning of danger, warning, and information symbols used in the manual.
States limitations on liability and information accuracy, and responsibilities of manufacturer/operator.
Outlines essential safety instructions and compliance with EU Directives and machine safety standards.
Defines the product's intended applications and safety requirements for safe operation.
Details software used for configuration and availability of training for development environments.
Identifies residual risks that must be included in system integrator's risk assessment.
Advises to observe on-site rules for accident prevention and occupational safety.
States product compliance with European Union directives and functional safety standards.
Details safety parameters like PFHD, MTTFd, DC, and SFF under different operating conditions.
Refers to section 'Compatibility of S-DIAS Safety Modules' in the system handbook for integration.
Provides a schematic diagram illustrating the wiring connections for the module's terminals.
Offers installation guidelines, wiring notes, and precautions for connecting/disconnecting modules during operation.
Instructions to ensure delivery contents are complete and intact before proceeding with installation.
Details requirements for mounting the S-DIAS modules on a DIN rail in a control cabinet, including clearance.
General| Brand | SIGMATEK |
|---|---|
| Model | STO 081 |
| Category | Control Unit |
| Language | English |
To Next Page
