Signal WS6980 - 3.1.2 LNB TYPE; 3.1.3 LNB FREQUENCY; 3.1.4 TRANSPONDER; 3.1.5 FREQUENCY

7
English
3.1.2 LNB TYPE
There are 4 types you can select: C Band/Ku Band/Unicable/DCSS.
3.1.3 LNB FREQUENCY
Press
AB
key to switch LNB frequency you want.
3.1.4 TRANSPONDER
Press
AB
key into the TP list. Use
YZ
key to
move the cursor then press OK to select the
TP you want.
3.1.5 FREQUENCY
Frequency of the current transponder, input the value by using the number
keys.
3.1.6 SYMBOL RATE
Symbol rate of the current transponder, input the value by using the number
keys.
3.1.7 POLARISATION
Press
AB
key to change vertical or horizontal of polarization.
3.1.8 22KHZ
Press
AB
key to turn on or o 22kHz TONE Switch.
3.1.9 DISEQC MODE
Press
AB
key to set the type of port as None/DiSEqC1.0/1.1.
3.1.10 DISEQC TYPE & INPUT
In C/Ku Band mode:
we can press
AB
key to set DiSEqC 1.0/1.1 as A/B port, and set Tone Burst
Mode as NONE/Tone Burst A/B.
In Unicable mode:
we can press
AB
key to switch IF Index from 1
to 8, or use number key to modify IF Freq, and
then press
AB
key to select A/B as Sat
Position.