Signal WS6980 - 3.1.11 LNB POWER; 3.1.12 BEEP TONE; 3.1.13 QUICK SEARCH

8
In DCSS mode:
There are 3 more options: Channel PIN/
Committed Switch/UnCommitted Switch.
According to your needs to modify these
parameters.
3.1.11 LNB POWER
Press
AB
key to Switch LNB Power ON/OFF.
3.1.12 BEEP TONE
Press
AB
key to Switch beep tone ON/OFF. If we open it, the beep of lock
alarm will open when we enter into the search screen.
3.1.13 QUICK SEARCH
When parameters have been set done, press
OK into quick search. There will have some
signal information displayed on the screen.
• Scan: Press the red key to search the
current TP.
• Auto Scan: Press the green key to auto blind
search the current satellite.