Signature JHS-A019-05KR2/E User Manual (English)

Questions and Answers:

D
Douglas CarrollAug 5, 2025
Why is my Signature JHS-A019-05KR2/E Air Conditioner not working?
- N
  Nathan HessAug 5, 2025
  If your Signature Air Conditioner isn't working, first, ensure it's properly connected to a power socket. If the overflow indicator shows "FL", discharge the water. The unit should be used in temperatures between 7-35°C (44-95°F). Adjust the set temperature if it's too low in cooling mode or too high in heating mode. Finally, ensure the room temperature is above 17°C (62°F) in dehumidification mode.
P
pdavisAug 10, 2025
How to improve the cooling effect of my Signature JHS-A019-05KR2/E?
- J
  Jacob HayesAug 10, 2025
  If your Signature Air Conditioner isn't cooling well, close any open doors or windows, and consider adding another unit if there are many people or heat sources. Make sure to clean or replace the filter screen. Also, check and clear any obstructions blocking the air inlet or outlet.
N
nmooreAug 14, 2025
What to do if the compressor of my Signature JHS-A019-05KR2/E does not work?
- J
  Jennifer FosterAug 15, 2025
  If the compressor of your Signature Air Conditioner isn't working, it might be due to overheat protection. Wait 3 minutes for the temperature to lower, and then restart the machine. Also, ensure the remote control is close to the air conditioner and directly facing the remote control receiver.
M
Michael KingAug 19, 2025
How to reduce noise from Signature Air Conditioner?
- W
  wmcclureAug 20, 2025
  To reduce noise from your Signature Air Conditioner, ensure it's placed on a flat and hard surface.

Signature JHS-A019-05KR2/E Specifications

General

Brand	Signature
Model	JHS-A019-05KR2/E
Category	Air Conditioner
Language	English

Signature JHS-A019-05KR2/E User Manual

Table of Contents

Questions and Answers:

Signature JHS-A019-05KR2/E Specifications