AFTER SALES SUPPORT
1300 777 137
service@unclebills.com.au
MODEL: EA0863 PRODUCT CODE: 59016 12/2018
12
Remove the Jukebox from its packaging and place carefully on a level surface so that the
Jukebox is sturdy and there is no risk of the Jukebox tipping or falling over. The Jukebox
has rubber feet on each of its legs for added stability. As the Jukebox is quite heavy and
large (as is its packaging) we suggest that several people assist in removing the Jukebox
from its packaging and locating it on a suitable surface. Be sure not to drop, bump or
apply any force or impact to the Jukebox and be sure to remove all packaging from the
Jukebox and its accessories.
Once all packaging has been removed and the Jukebox is located in a suitable position on
a stable and secure surface, plug the power adaptor in to a power socket and connect the
other end to the Jukebox. The DC power input of the Jukebox is located on the rear panel
of the Jukebox. Once each end of the power adaptor has been correctly and securely
connected, switch the power socket on.
Getting Started
To Next Page
Loading...
