AFTER SALES SUPPORT
1300 777 137
service@unclebills.com.au
MODEL: EA0863 PRODUCT CODE: 59016 12/2018
14
2. Use the LIGHT MODE switch on the rear panel of the Jukebox to change the LED lighting effects
between “PLAY” and “HOLD” mode.
• When set to “PLAY” mode, the LED light tubes will fade in and out across several different
colours continuously.
• When set to “HOLD” mode, the LED light tubes will illuminate in only one colour.
NOTE: When using the LIGHT MODE switch to change from “PLAY” mode to “HOLD” mode, the
colours in “HOLD” mode have been predetermined and may not be the exact same colour as the
LED light tubes were in “PLAY” mode.
3. To turn off the LED lighting effects, press the LIGHT (On/Off) button again. All the LED lighting
effects will no longer be illuminated.
Switching Between Audio Modes
The Jukebox has several different functions for audio playback. To select between the CD player,
USB input, SD card input, analogue FM radio, Bluetooth
®
audio streaming and turntable, follow the
steps below.
1. Press the ON/OFF (Main Power) button (No. 6 on the Jukebox parts list) to turn the Jukebox on.
The unit will automatically enter standby mode.
2. Press the STANDBY button (No. 25 on the Jukebox parts list or No. 1 on the Remote Control
Function List) to wake the Jukebox from standby mode. The unit will automatically enter FM
Radio mode.
3. Cycle through the audio modes by pressing the MODE button repeatedly until the desired
function is displayed on the LCD display.
Audio Mode LCD Display
FM Radio --.- MHz
CD ----
USB USb
SD Sd
Bluetooth
®
bLUE
Turntable PH
Instructions (cont.)
To Next Page
Loading...
