SIGNIFY EA0863 - Bluetooth

AFTER SALES SUPPORT
1300 777 137
service@unclebills.com.au
MODEL: EA0863 PRODUCT CODE: 59016 12/2018
24
7. Press the button to stop recording.
8. Once nished, pull the USB ash drive/SD card out from the Jukebox.
9. To playback the recorded les, either load the USB ash drive/SD card back into the Jukebox
itself and follow regular playback instructions (see page 21 for further instructions), or load the
USB ash drive/SD card into a PC and search for the newly created folder called “REC”. All
recorded les will be in there.
NOTE: The MP3 tracks can only be played back on devices that are capable of reading and
playing MP3 les.
Bluetooth
®
The Jukebox features a Bluetooth
®
receiver which enables it to be wirelessly connected to compatible
Bluetooth
®
enabled devices such as smart phones and Bluetooth
®
enabled media players. To pair the
Jukebox with a compatible Bluetooth
®
enabled device, follow the steps below.
1. Press the ON/OFF (Main Power) button (No. 6 on the Jukebox parts list) to turn the Jukebox on.
The unit will automatically enter standby mode.
2. Press the STANDBY button (No. 25 on the Jukebox parts list or No. 1 on the Remote Control
Function List) to wake the Jukebox from standby mode. The unit will automatically enter FM
Radio mode.
3. Press the MODE button repeatedly until the LED display shows “bLUE” for Bluetooth
®
mode.
4. On the Bluetooth
®
enabled device, activate (or turn ON) Bluetooth
®
function, and search for
nearby devices. When the device discovers “JUKE BOX”, select and connect to “JUKE BOX”.
This process should take a few seconds to connect – no PIN or pass code will be required.
5. When the Jukebox and the Bluetooth
®
enabled device have connected, you will notice that
“bLUE”, which was initially ashing on the LCD display, is now solid (not ashing), and the
Bluetooth
®
enabled device should also show “JUKE BOX” as “Connected”.
6. Now you can open the media player on your Bluetooth
®
enabled device to stream the desired
tracks on the Jukebox.
NOTE: If the last connected device is within the Bluetooth
®
reception range of the Jukebox,
you will not be able to pair a new device to the Jukebox. You will need to turn off the Bluetooth
®
connection on the last connected device in order to connect a new device.
Instructions (cont.)