SIGNIFY EA0863 - Page 17

AFTER SALES SUPPORT
1300 777 137
service@unclebills.com.au
MODEL: EA0863 PRODUCT CODE: 59016 12/2018
17
Replacing the Stylus
It is recommended that the stylus is replaced as soon as you notice a change in the sound quality.
Prolonged use of a worn-out stylus may damage the record. Wear and tear on the stylus will be
accelerated when playing 78 RPM records.
1. Remove the stylus by pulling it straight down and out, in the opposite direction of the tonearm
(see Fig. 2).
2. Find a compatible replacement stylus.
NOTE: If purchasing the replacement stylus in a store, it will be helpful to bring the old stylus with
you for your reference. Most good Electronic and Music stores will have replacement styluses.
3. With the point facing down, align the new stylus and gently press it back into place (see Fig. 3).
WARNING:
• Do not bend the stylus.
• To avoid injury, do not touch the needle.
• Keep out of reach of children.
• Handle with care as the stylus is delicate. Use of a bent or broken stylus may damage the
record and cause malfunction.
• Do not expose the stylus to extreme heat.
• Contact a qualied repair person if you are having difculties changing the stylus.
Fig. 2
Fig. 3
Instructions (cont.)