Signode SCM-12 - Page 12

15
#6 SYMPTOM: Tool cannot be removed from strap after cycle is completed.
CAUSE
REMEDY
1.
Upper strap was not cut off.
2.
Chipped or worn parts (punches and
dies).
1.
Inspect both the cutter for damage or
adjustment. Cut strap manually from
package to release tension and de-
energize feedwheel.
2.
Inspect and replace worn sealer parts.
#7 SYMPTOM: Feedwheel slips during tensioning.
CAUSE
REMEDY
Flat spot on feedwheel.
Replace feedwheel.