Need help?Do you have a question about the SII 410 and is the answer not in the manual?
General| Print Method | Thermal Transfer |
|---|---|
| Print Resolution | 203 dpi |
| Maximum Print Width | 4.09 inches (104 mm) |
| Interfaces | USB, Serial |
| Label Material | Paper |
| Dimensions | 7.9" W x 9.7" D x 7.5" H |
| Maximum Print Length | 39.37 inches (1000 mm) |
| Power Supply | AC adapter (100-240V, 50/60Hz) |
Details actions that may result in severe personal injury or loss of life.
Details actions that may result in printer damage or minor personal injury.
Specifies optimal environmental conditions for printer installation, including temperature and humidity.
Describes the Smart Label Printer's capabilities and direct thermal printing technology.
Details the features of the Smart Label program, including WYSIWYG editor and database capabilities.
Lists the required hardware and software components for PC and Mac users.
Recommends using Seiko Instruments SmartLabels and explains the sensor mark for alignment.
Provides guidelines for storing and handling labels to maintain their quality and prevent damage.
Instructions on how to carefully remove the printer and its components from the box.
Step-by-step guide for installing the Smart Label program on Mac OS X and Windows.
Procedure for connecting the printer to a power source and turning it on.
Instructions for connecting the printer to a PC or Mac using USB or serial cables.
Steps for preparing and loading a roll of labels into the printer, including preparing the label end.
Procedure for performing a quick test on SLP models 410, 420, and 430.
Procedure for performing various tests (logo, sample label, density, serial number) on SLP models 440 and 450.
Introduces thermal print technology and the use of Seiko Instruments SmartLabels.
Provides precautions for maintaining the printer's performance and avoiding damage.
Explains how to toggle the printer between off line and on line modes using the power button.
Procedure for removing and replacing label rolls, including safe removal and loading.
Steps to realign labels if they are advancing at an angle, ensuring straight feeding.
Detailed instructions for safely removing labels that have become stuck inside the printer.
Details printer technology, resolution, paper width, printable width, and print speed.
Lists interface types (USB, RS-232) and power adapter/cord details for different models.
Provides physical dimensions, weight, and estimated print life for the SLP models.
Specifies operating and storage temperature and humidity ranges for the printer.
To Next Page
