SIKA VH Series - Sensor Plug M12 X1 (4-Pin); Fixed Connection Cable

Electrical connection VH / VK
- 26 - © SIKA • Ea3000_FlowSwitch • 03/2021
Flow switch type VHS.../VKS... Flow switch type VHS...X
Fig. 7
* To prevent electrostatic charging the VHS…X devices have to be connected to the equipotential
bonding via the plug connector.
3.2 Sensor plug M12x1 (4-pin)
 Only use suitable coupling sockets M12x1 for the connection. These are supplied as ac-
cessories either with a directly moulded cable or for self-assembly.
3.3 Fixed connection cable
 Connect the connection cable according to the connection diagram ( Fig. 9,  Fig. 10):
Pin assignment of the plug:
Fig. 8
Standard contact:
Changeover contact:
Flow switch
Type VH3 / VK3
Flow switch
Type VH3...X
Only flow switch
Type VH3...
Fig. 9a
Fig. 9b
Fig. 10
* To prevent electrostatic charging the VH3…X devices have to be connected to the equipotential
bonding via the fixed connecting cable.