SIKA VH Series - Materials in Contact with Medium

Technical Data VH / VK
- 32 - © SIKA • Ea3000_FlowSwitch • 03/2021
Type
VHS…X
VH3…X
Electrical characteristics
Electrical connection
Plug connector
DIN EN 175301-803-A
incl. cable socket
1,5 m PVC sheathed cable
Wire cross-section
-/-
0.5 mm
2
Switching current
Max. 1 A
Switching voltage
Max. 230 VAC, 48 VDC
Rating
Max. 26 VA, 20 W
Degree of protection
(EN 60529)
IP 65
Protection class
(EN 60730-1)
Class II
Class I
Applies to type VH...X flow switches
The ignition energy of the explosive atmosphere should not be below 60 µJ.
The effective internal inductances and capacities are negligibly small.
7.1 Materials in contact with medium
Type VHS / VH3
(Brass version)
VHS / VH3
(Stainless steel version)
VKS VK3
Body
Brass CW614N
Stainless steel 1.4571
PPE+PS Noryl
TM
30 % glass fibre rein-
forced
Paddle
Brass CW614N
Stainless steel 1.4571
PPE+PS Noryl
TM
30 % glass fibre rein-
forced
Pipe section
Brass CW614N
Stainless steel 1.457
Brass CW617N-DW
(VK3)
Copper (VK3)
PVC (VKS / VK3)
Process connec-
tion
Brass CW614N (VHS05,
VH305)
Brass CW617N (VHS01)
Stainless steel 1.4571
-/-
Soldering adapter
-/-
-/-
Brass CW617N
Bushing
PPE+PS Noryl
TM
30 % glass fibre rein-
forced
PVDF
-/-
Rivet
Brass CW508L
Stainless steel 1.4303
-/-
Pin
*1
Stainless steel 1.4571
Magnet
Hard ferrite
Gasket
NBR
NBR (Brass pipe section)
EPDM (PVC pipe section)
*1 Only VK325, VK340, VK350, VKS25, VKS40, VKS50 and VKS350.