EasyManua.ls Logo

Siku 1 - Maintenance; Cleaning and Care Instructions; Storage and Transport Conditions; Warranty Terms and Conditions

Siku 1
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MAINTENANCE
Disconnect the fan from the electrical power supply before all maintenance work!
Clean the fan with a soft cloth or a brush and a mild soap solution. In doing so, protect the electronic components from
splashing water! After cleaning, dry the surface and only connect to the electrical power supply once fully dry.
STORAGE AND TRANSPORT REGULATIONS
The device should be stored in the original packaging, in a ventilated room, at a temperature from +5°C to +40°C and relative
humidity of max. 80%.
MNAUFACTURER’S GUARANTEE
With the purchase of this device, the consumer confirms that they have familiarised themselves with the operating conditions,
operating instructions and the requirements pertaining to operation, storage, transport, installation, set-up, connection,
maintenance and repairs and the guarantee obligations presented in the documentation provided by the manufacturer,
and that they agree with them.
The manufacturer stipulates the guarantee period as 60 months from the sales date of the device via the retailer on condition
that the regulations for transport, storage, installation and operation are fulfilled by the consumer.
If a malfunction should arise during the warranty period due to a fault of the manufacturer, the consumer is entitled to have
this defect rectified free of charge.
The guarantee service comprises the execution of tasks carried out in connection with the rectification of defects in the device
in order to guarantee the intended use of the device by the consumer.
The rectification of defects is implemented through replacement or repair of the device or a constituent part of the device.
ATTENTION!
To carry out a warranty service, please submit the operating instructions or another document that replaces them as well
as the invoice slip with the sales date confirming the purchase.
The model of the device must match with the model cited in the operating instructions.

Other manuals for Siku 1

Related product manuals