Need help?Do you have a question about the Siku 1 and is the answer not in the manual?
Specifies the available outlet port diameters for the fans, including 100, 125, and 150 mm options.
Lists and describes the different SIKU fan series available, such as SIKU 1, SIKU 2, SIKU 3, VKO, M, AZ, PF, LD, LD Auto, S, and Silenta-S.
Details the available decorative front panel materials, including brushed aluminium and polished stainless steel for specific series.
Outlines the additional features and options available for the fans, such as pull-switches, run-on timers, and humidity sensors.
Describes different motor and impeller modifications, including ball-bearing motors, high-performance motors, and 12-volt options.
Provides example product designations with explanations of how to interpret the model codes and their features.
Covers essential safety measures for electrical connection, servicing, user suitability, and operational restrictions.
Details precautions related to air supply, conveyed media, and preventing obstruction of fan openings during operation.
Provides instructions for the proper disposal of the device at the end of its service life, emphasizing waste separation.
Defines the primary intended use of the fans for exhaust ventilation in small and medium-sized houses.
Describes further applications for aeration, ventilation, and installation within ventilation pipes for specific fan models.
Specifies that certain fan models are designed for wall and ceiling installation.
Confirms that the fans are designed for continuous operation with a permanent power supply.
Notes that the fan design is continuously improved, potentially leading to minor differences from descriptions.
Details power supply requirements (220-240V, 50Hz, 12V models) and protection ratings (IPX4, IP24, IP34).
Provides nominal air flow volumes for different outlet port sizes and the corresponding electrical rated power consumption.
Specifies the maximum noise level at 3 meters and the recommended ambient operating temperature range.
Lists all items included in the delivery package, such as the fan unit, mounting hardware, and operating instructions.
Illustrates the installation steps for SIKU 1, SIKU 2, SIKU 3, and VKO fan models.
Details the installation process for the PF series fans through a series of diagrams.
Provides visual guidance on the installation procedures for M and AZ series fans.
Shows the installation sequence and steps for LD, LD Auto, S, and Silenta S fan models.
Illustrates the wiring configuration for fans equipped with a pull-switch and a movement sensor.
Presents the wiring diagram for fans that do not feature a pull-switch.
Shows wiring diagrams for fans incorporating run-on time or humidity sensor functions, with or without a pull-switch.
A critical warning to connect 12V fans exclusively to a 12V power supply system.
Explains the operation of fans with a run-on timer (T), including start-up and shut-off sequences.
Details the logic for fans with a start-up delay (T1) and subsequent run-on timer operation.
Describes how fans with humidity (TH) and timer controls operate based on room conditions and external switches.
Explains the functionality of fans with a movement sensor (TP) and run-on timer.
Alerts users to the mains voltage on the PCB and the need for plastic screwdrivers for adjustments.
Illustrates how to set the run-on time and humidity sensor values for SIKU, SIKU 2, SIKU 3, and VKO fans.
Shows the procedure for adjusting timers and sensors on S, Silenta S, LD, and LD Auto fan models.
Details the settings for timers and sensors on M and AZ series fans, including jumper configurations.
Provides guidance on cleaning the fan using a soft cloth and mild soap, protecting electronic components.
Specifies the recommended temperature and humidity levels for storing the device in its original packaging.
Outlines the manufacturer's guarantee period and the consumer's confirmation of familiarization with operating instructions.
Lists the necessary documentation, such as operating instructions and invoice slips, required for warranty service.
Details the various circumstances under which the manufacturer's guarantee will not be awarded.
States that the manufacturer accepts no liability for defects or damages resulting from improper use or non-compliance with instructions.
Declares the product's compliance with relevant electromagnetic compatibility and low voltage directives for CE labelling.
Includes fields for recording manufacturing date, retailer information, acceptance log, and sales date for the product.
To Next Page
General