VITTORIO VENETO 24/03/2011
CE DECLARATION OF MACHINE COMPLIANCE
SILCA S.p.A. - VIA PODGORA 20 ( Z.I.)
31029 VITTORIO VENETO (TV) - (ITALY)
TEL. 0438 9136 - FAX. 0438 913800
Declares under its own responsibility that the Key-cutting machine model
OPERA IV
complies with the requirements of the following European Directives:
European Union DIRECTIVE 2006/42/CEE (Machines)
and with the EN 292/1 – EN 292/2 Standards
European Union DIRECTIVE 2004/108/CE
(Electromagnetic Compatibility)
and with the EN 55013 ( section 3.2) – EN 55014 ( section 4.1.2 ) Standards
European Union DIRECTIVE 2006/95/CE
(Low Voltage) | 97 |
and with the EN 60204-1 ( sections 20.2 – 20.3 – 20.4 ) Standards
Claudio Tomasella of the Silca S.p.A. Research & Development Division is authorized
to create a Technical File.
General Manager Basic Production Center
To Next Page
Loading...
