EasyManua.ls Logo

Silencer 30SL - Chirp Indicators; Parking Light; Active Arming - Lock & Arm; Sensor Bypass

Silencer 30SL
9 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
UM-FULL-30SL rev A 3
CHIRP INDICATORS PARKING LIGHT
Chirp Function Parking Light Function
1 Chirp Arm 1 Flash Arm
2 Chirps Disarm 2 Flashes Disarm
3 Chirps Defective Reminder 3 Flashes Disarm / Triggered
4 Chirps Disarm / Triggered 12 Flashes Car Locator
6 Chirps Car Locator Constant On Under Remote Start
ALARM OPERATING CONDITION
Siren / Horn
Parking
Light
LED Doors Starter Dome Light
1. Arming
1 or 3
Chirps
1 Flash Slow Flash Locking Disable
2. Disarming
2 or 4
Chirps
2 or 3
Flashes
Unlocking
Turns on for
30-Seconds
3. Trigger Alarming Flashes Slow Flash Disable Flashes
4. Passive
Starter Disable
Fast Flash Disable
5. Panic Alarming Flashes Flashes
6. Car-Jacking Alarming Flashes Disable Flashes
7. Car Locator 6 Chirps 12 Flashes Locking
ACTIVE ARMING – LOCK & ARM
Press button on the transmitter.
The horn or optional siren will chirp once and the parking light will ash once indicating that the system is now armed.
The vehicle’s doors will lock upon arming if interfaced with the security system.
DEFECTIVE SENSOR REMINDER: If the horn or optional siren sounds 3 chirps, then you have left a door, trunk,
or hood lid ajar.
SILENT ARMING / DISARMING: Press the transmitter and buttons at the same time. This will arm or disarm your
security system, No chirp sound will be heard, arm / disarm conrmation will be through the vehicles parking lights only.
SENSOR BY-PASS
The sensor bypass feature is programmed to activate for one arming cycle only. The security system will return to normal
operation during the next arming cycle.
Sensor By-Pass : Press the
button two times within 5 seconds to arm the security system and by-pass the
shock sensor.

Other manuals for Silencer 30SL

Related product manuals