25"
"
10.Client “Post care Instructions|”
After all Electrolysis procedures, the following steps must be
followed.
• Do not touch, stretch or manipulate treated area for at least 24 hours
following treatment.
• Clean treated area very gently using fingers and facial cleanser. Do
not use face cloth, facial brush or sponges.
• If you wish to wear makeup over treated area, apply foundation very
gently, using clean fingers. Avoid sponges as they may harbour
bacteria.
• To avoid hyperpigmentation, use a sun block and avoid sun
exposure, including tanning salons for one week.
Warning:
• If scabs are present, do not remove them.
• Removing scabs may leave red marks on the skin lasting several
months.
To Next Page
Loading...