ENEN
11
6.2 Treatment plan
Treat each area separately for 15 minutes. You can treat as many
areas as you like in one session.
For maximum effectiveness, we recommend the following:
U
Make sure you have enough gel on the treatment surface
(#1) at all times during the treatment.
U
Do not leave the device on one spot of skin. Keep moving
the device covering the entire treatment area. This will
prevent overheating of the treatment area, and reduce the
possibility of any adverse effect.
U
Make sure the 3 electrodes (#2) are always in full contact
with the skin.
U
If the energy level feels uncomfortable, reduce it to a level
that is comfortable for you.
U
Only change energy levels when the treatment surface
(#1) is not in contact with the skin.
U
Treat each area for at least 10 minutes at energy level 5.
Minutes
Effective treatment
Temperature
build-up of skin
FaceTite EU124 7326D ALL ED371-10 released.indd 11 17/03/2019 13:29:14
To Next Page
Loading...
