Silk'n FaceTite - 12 Consumables; 13 Customer Service

ENEN
16
Problem Checks
The device does not
start.
Make sure the adapter (#6) is properly
connected to the device, that it is plugged
into the electricity supply, and that you have
pressed the control button (#4).
I can't feel any heat
from the device
even though I
pressed the control
button (#4).
Heat will only be emitted if the treatment
surface (#1) is in full contact with the skin,
and you have applied sucient gel before
and during your treatment. This is a safety
feature. Gel is essential for the device to
work.
One or more lights
blink continuously.
The device has malfunctioned.
Unplug the device and restart. If the
problem continues, contact customer
service.
The device has
stopped working
and is in standby
mode.
Press the control button (#4) again to
restart the device.
For problems or queries, please contact customer service.
12. Consumables
You can purchase more Silk'n Slider Gel from our website:
www.silkn.eu.
13. Customer service
For more information see our website www.silkn.eu. This manual
is also available as a PDF download from the website. Contact
Silk’n Customer Service to report unexpected operations or
events, or any other problem with your device. Our contact
details are:
FaceTite EU124 7326D ALL ED371-10 released.indd 16 17/03/2019 13:29:14