ENEN
7
3. Safety features
Silk'n FaceTite protects your skin from overheating and has these
safety features:
U
Thermal sensor and heat stabilizer: These measure
the skin temperature, stabilize the heat energy and prevent
overheating. When the skin temperature reaches 42°C -
43°C, the stabilizer will automatically stop emitting heat,
until the skin temperature lowers enough for the stabilizer
to resume heating.
U
Movement sensor: Silk'n FaceTite will only emit RF heat
when you are moving the device across your skin. If you
keep the device on one part of your face for too long, the
device will stop emitting heat automatically. This is a safety
device.
4. Device controls & settings
Button Action Function / Mode
N/A The device is connected
to the electricity supply
via the adapter (#6).
Standby mode
All 5 energy level
indicator lights (#3)
cycle continuously.
Control
button (#4)
Press x 1 Energy level 1 - 1 light on
Press x 2 Energy level 2 - 2 lights on
Press x 3 Energy level 3 - 3 lights on
Press x 4 Energy level 4 - 4 lights on
Press x 5 Energy level 5 - 5 lights on
Press x 6 Goes back to level 1
Long press Goes back to standby
mode
FaceTite EU124 7326D ALL ED371-10 released.indd 7 17/03/2019 13:29:13
To Next Page
Loading...
