Silonn SLIM09 - Page 12

10
Problem
“ICE FULL”
light is on.
Ice sticks
together.
Possible Causes Solution
Ice is blocking the
infrared sensor.
Making ice takes too
long.
The water temperature
is too low.
Infrared sensors do not
work.
Evaporator
deformation.
1. Wipe clean the infrared
sensors.
2. Contact customer ser-
vice if the infrared sen-
sors still don’t work.
Empty the ice basket.
Stop making ice, after the
ice melts restart and try
again.
Fill with water tempera-
tures between 8°C and
25°C.
Ambient or water
temperature is too high.
Water pump is
damaged.
The gears in the motor
are broken.
Refrigerating system
blocked.
Refrigerating system
leaking.
The fan stopped working.
The wires are loose.
Please contact customer
service.
Please contact customer
service.
Not making
ice.
Keep ambient temperature
less than 32°C and fill with
cold water.