Attaching the carrycot to your
chassis
4.1 To attach your Surf Carrycot to
the Surf chassis hold the carrycot
above the chassis. Locate the
carrycot chassis connector onto
the attachment post of the chassis.
Ensure the carrycot ‘clicks‘ into
place. The carrycot should be tted
rearward facing. Lift the carrycot
gently by the bumper bar to check it
has locked into place.
WARNING: Do not add a
mattress other than the one
provided.
Detaching the carrycot from
your chassis
4.2 With the Surf Carrycot facing you
press the red release button rst
located on the side of the carrycot
until it clicks into place.
WARNING: This button is
now unlocked. It will re-lock
automatically when the
carrycot is re-attached to the
chassis.
Then while pressing and holding the other
black release button on the opposite side
of the carrycot, lift the carrycot from the
chassis using the bumper bar.
WARNING: Always ensure your
bumper bar is attached when
your child is in the carrycot.
The carrycot will now lift clear of the chassis.
4.1
4.2
To Next Page
Loading...
