EasyManua.ls Logo

Silvercrest 285527 - Setting up the product; Operation; Setting the units and the weighing mode

Silvercrest 285527
103 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14 GB
Note: If you need to reset the time, press and hold the
T-SET button
4
until the time display blinks. Proceed as
described above.
Setting up the product
Place the product on a solid, flat, non-slip surface.
This product is equipped with non-slip rubber feet. Furni-
ture surfaces may be made of a variety of materials and
are treated with many different types of cleaning agents.
Therefore, it is not possible to entirely exclude the possibil-
ity that some of these materials contain substances that
could corrode and soften the product’s rubber feet. If pos-
sible, place an anti-slip mat under the feet of the product.
Operation
Setting the units and
the weighing mode
You can choose between metric and imperial / avoirdupois units
of weight. For the range 0 g–999 g, the measurement unit is in
g; from 0 oz–15.9 oz, the measurement unit is shown in oz.
For the range from 1000 g onwards, the measurement unit is
in kg; from 16 oz the measurement unit is shown in lb:oz. Like-
wise, you can weigh liquids, in which case briefly press the
▼UNIT button
6
until the desired measurement unit is shown
the LC display
5
.
In the metric system:
– Millilitre (ml) water: WATER” is shown in the
LC display.
– Millilitre (ml) milk: “MILK” is shown in the
LC display.

Table of Contents

Related product manuals