16 GB
Place the next item to be weighed in the bowl / container.
The weight of the newly added item is shown in the
LC display
5
.
Note: You can repeat this process many times. Never
place more than 5 kg onto the product.
Remove the bowl / container and the weighed item from the
weighing surface
2
. Press the ▲ZERO / TARE button
7
.
Again, the a weight of “0” is shown in the LC display
5
.
Removing weighed item
Press the ▲ZERO / TARE button
7
. The message “TARE”
appears in the LC display
5
. Again, a weight of “0” is
shown in the LC display
5
.
Remove the desired amount of the weighed item.
The weight of the item is shown with the minus sign in the
LC display
5
as a negative value.
Note: You can repeat this process many times.
Remove the bowl / container and the weighed product from
the weighing surface
2
. Press the ▲ZERO / TARE button
7
. Again, a weight of “0” is shown in the LC display
5
.
Setting the timer
The timer can be used in the clock and weighing modes. It
enables you to set the timer for a defined time period. The
defined time runs as a countdown and a signal sounds at the
end of the period.
Press the T-SET button
4
once in the clock mode or
twice in the weighing mode. A bell-symbol appears in the
LC display
5
and the time interval to be defined blinks.
Note: You can set the time period precisely to the second.
Press and hold the ▲ZERO / TARE button
7
or ▼UNIT
To Next Page
Loading...
