Silvercrest 285527 - Switching off the weighing function; Temperature display

17 GB
button
6
, so that the time readout in the LC display
5
runs faster.
Press the ▲ZERO / TARE button
7
or ▼UNIT button
6
to set the time in 10 minute intervals.
Press the T-SET button
4
once to accept the setting. Press
the ▲ZERO / TARE button
7
or ▼UNIT button
6
to set
the time in 1 minute intervals.
Press the T-SET button
4
once. Press the ▲ZERO / TARE
button
7
or ▼UNIT button
6
to set the time in 10 second
intervals.
Press the T-SET button
4
once. Press the ▲ZERO / TARE
button
7
or ▼UNIT button
6
in set time in 1 second in-
tervals.
Press the T-SET button
4
to start the countdown.
Note: You can reset the timer. To do this press the T-SET
button
4
.
A signal sounds as soon as set time period has elapsed.
Press any button to switch off the signal.
Switching off the weighing function
Note: If the product has not been used for about 2 minutes, it
switches automatically to the clock mode.
Press the ON / OFF button
3
to return manually to the
clock mode.
Temperature display
The temperature is shown in °C in the lower right of the
LC display
5
.