Silvercrest 322247 - Page 47

47 GB/IE
To switch on the device press the ON / OFF / MEASURE button
8
.
Press the S button
7
for five seconds.
The current set temperature unit appears
on the display. Using the S button
7
select the temperature unit (°F or °C).
Confirm by pressing the M button
9
.
The time format will appear on the
display. Select the time format (12 hour
or 24 hour) using the S button
7
.
Confirm by pressing the M button
9
.
The year display will flash on the
display. Using the S button
7
select the
current year. Confirm by pressing the M
button
9
.
The month display will flash on the
display. Using the S button
7
select the
current month. Confirm by pressing the
M button
9
.
The day display will flash on the display.
Using the S button
7
select the current
day. Confirm by pressing the M button
9
.
Note: If the 12-hour time format has
been configured, the positions for the month and day will be
reversed.