54 GB/IE
If you have activated Bluetooth
®
data transfer, the data will be
transferred after the measurement. The thermometer displays the
symbol for Bluetooth
®
during transfer.
Note: The “HealthForYou“ app must be activated for transfer to
occur. If the current data is not displayed on your smartphone,
repeat the transfer process as described in the chapter ”transfer-
ring measured values“.
The device switches off automatically after 60 seconds, or press the
ON / OFF / MEASURE button
8
for 5 seconds to switch it off.
Clean the device after every use as described in the chapter
”Cleaning and care“.
Measuring object temperatures
To switch on the multi-function thermometer, press the ON / OFF /
MEASURE button
8
for one second.
Then press the M button
9
and the S button
7
at the same time
for 3 seconds to change to the object temperature mode.
appears
on the LCD display.
Point the sensor tip towards the object
3 cm
or the liquid to be measured (never
immerse in liquids!) at a distance of 3 cm
and press the ON / OFF / MEASURE
button
8
for 1 second.
Release the ON / OFF /
MEASURE button
8
. The meas-
ured value appears on the display
and the end of measurement is indi-
cated with a short beep (when the
key tone is activated). The next
measurement is possible after
approx. 5 seconds.
To Next Page
Loading...
