55 GB/IE
To leave object temperature mode once more, hold the M button
9
and the S button
7
at the same time for 3 seconds again.
If you have activated Bluetooth
®
data transfer, the data will be
transferred after the measurement. The thermometer displays the
symbol for Bluetooth
®
during transfer.
Note: The “HealthForYou“ app must be activated for transfer to
occur. If the current data is not displayed on your smartphone,
repeat the transfer process as described in the chapter “transferring
measured values“.
The device switches off automatically after 60 seconds, or press
the ON / OFF / MEASURE button
8
for 5 seconds to switch it
off.
Please note that the displayed temperature is the temperature which
has been determined and is not the adjusted surface temperature.
It cannot be compared with the forehead / ear temperature.
Displaying saved measured values
The device saves the measured values of the last 30 measurements
automatically. If the 30 memory spaces have been exceeded, the
respective oldest measured value will be deleted.
The saved measured values can be requested as follows:
To switch on the multi-function thermometer, press the ON / OFF/
MEASURE button
8
for one second.
Press the M button
9
. The last measured value will appear on
the display.
If you have activated Bluetooth
®
data transfer, the data will be
transferred after the measurement. The thermometer displays the
symbol for Bluetooth
®
during transfer.
Note: The “HealthForYou“ app must be activated for transfer to
occur. If the current data is not displayed on your smartphone,
To Next Page
Loading...
